Loading..

Product was successfully added to your shopping cart.





Navigation

"Hollywood" M-14 Blank Adapter (BFA) - Blank Firing Adapters - Weapons Related

"Hollywood" M-14 Blank Adapter (BFA)

Product Code: hollywood-m-14-blank-adapter Category: Blank Firing Adapters

Be the first to review this product

"Hollywood" M-14 Blank Adapter (BFA) for M14 / M1A Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply loosen the set screw on the front of the site base, remove the castle nut, remove the flashider, inset the adapter into the flashider (narrow end out) and reassemble. Prices are for one piece or for a set of two.

$15.00

* Required Fields

$15.00
Description

Details

"Hollywood" M-14 Blank Adapter (BFA) for M14 / M1A Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply loosen the set screw on the front of the site base, remove the castle nut, remove the flashider, inset the adapter into the flashider (narrow end out) and reassemble. Prices are for one piece or for a set of two.

We have one stock aperture sizes instock: .110 The first stock aperture size on this bfa is 0.110 which should work with the weaker Austrian L31A1 blanks in most rifles. It will also work as a pilot hole to drill them out for more powerful blank loads (primarily European military .308 blanks). It is important to note that even though they use same nomenclature designation, there can be a difference in power based on country of origin. For example, British Radway Green L31A1 blanks (headstamp RG) are hotter than Austrian L31A1 (headstamp HP). For most blanks, you will need to enlarge the hole. This is very important!

Flash hider not included.

Please specify which starting aperture you would like when you order!

Guidelines for Drilling Out Blank Adapters:

  • Swanson: (.187)
  • USGI Blanks: (.171)
  • Radway L31A1 Blanks: (.136)
  • Austrian L31A1 Blanks: (.110)

*These sizes work in both semi and full auto in a USGI H&R M14. They may take some tweaking for your rifle. Speak with the manufacturer of your blanks to get a ballpark starting range! This information is included as a guide. We are not responsible for damaged weapons or body parts!

CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE

Additional

Additional Information

Condition NEW
Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews
  1. Be the first to review this product

Add a review