Loading..

Product was successfully added to your shopping cart.





Navigation

"Hollywood" M-16 Blank Adapter (BFA) - M-16 Accessories - Weapons Related

"Hollywood" M-16 Blank Adapter (BFA)

Product Code: hollywood-m-16-blank-adapter Category: M-16 Accessories

Be the first to review this product

"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Priced per BFA. If you would like to purchase a set of two, you can mix sizes. Select the size for the first BFA from the first drop down box and if you would like a set, select the size for the second BFA from the second drop down box.

$15.00

* Required Fields

$15.00
Description

Details

"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Priced per BFA.

We make three different sizes for these blank adapters. When you place the order, you MUST specify which size BFA's you would like. USGI blanks and Euro surplus are the weakest blanks and use the smallest aperture. LAM blanks are a "mid-grade" blank with a loud retort, but not as loud and not as much flash as the Swanson Hot blanks. See the links page for blanks vendors to correspond with the adapters below. Flash hider not included.

Available in three sizes:

  • USGI for use with M200/M200A1 blanks (aperture .080)
  • LAM for use with Atlantic Wall "LAM" mid-power blanks (.125)
  • HOT for use with Swanson's Motion Picture Blanks (aperture .175)

*We also have some BFA's for the M-16 that do not have a hole drilled in them. If you have an odd project, or SBR that will not run and needs a tighter hole, this may be the solution, but be careful!

CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE!

Additional

Additional Information

Condition NEW
Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews
  1. Be the first to review this product

Add a review