Loading..

Product was successfully added to your shopping cart.





Navigation

AK-47 Blank Firing Adapter (BFA) - Weapons Related

AK-47 Blank Firing Adapter (BFA)

Product Code: ak-47-blank-firing-adapter-(bfa) Category: Weapons Related

Be the first to review this product

AK-47 Blank Firing Adapter (BFA). These are BFA's for the AK-47 in 7.62x39. BFA is predrilled to work with many surplus blanks / guns, however some rifles / blank combinations require more gas pressure. Styles vary based on availability, but all can be made to work with just about any surplus style AK rifle with a threaded barrel.

The smooth body BFA have an opening of .250, the fully knurled tend to run about .205 and the smooth with knurled top around .180. If you have difficulties with a BFA, you can place a thin washer with a smaller hole (it must have a hole to relieve back pressure) inside the BFA before installing. Changing washers / disks gives you the ability to fine tune your rifle. As a starting point, try .180 as this should make any riifle work. If the brass is hevily deformed, work up to a .205 hole and see if it will still cycle without deforming the brass. Most rifles will work best in this range.

To install, simply remove the muzzle device currently on your AK and thread on. Overall condition is excellent used. The style may vary slightly based on country of manufacture and availability. BFA's can easily be painted. Price is per piece. Currently we have the smooth body with the .250 starting hole.
$15.00
Description

Details

AK-47 Blank Firing Adapter (BFA). These are BFA's for the AK-47 in 7.62x39. BFA is predrilled to work with many surplus blanks / guns, however some rifles / blank combinations require more gas pressure. Styles vary based on availability, but all can be made to work with just about any surplus style AK rifle with a threaded barrel. The smooth body BFA have an opening of .250, the fully knurled tend to run about .205 and the smooth with knurled top around .180. If you have difficulties with a BFA, you can place a thin washer with a smaller hole (it must have a hole to relieve back pressure) inside the BFA before installing. Changing washers / disks gives you the ability to fine tune your rifle. As a starting point, try .180 as this should make any riifle work. If the brass is hevily deformed, work up to a .205 hole and see if it will still cycle without deforming the brass. Most rifles will work best in this range. To install, simply remove the muzzle device currently on your AK and thread on. Overall condition is excellent used. The style may vary slightly based on country of manufacture and availability. BFA's can easily be painted. Price is per piece. Currently we have the smooth body with the .250 starting hole.
Additional

Additional Information

Condition EXC-
Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews
  1. Be the first to review this product

Add a review