Loading..

Product was successfully added to your shopping cart.





Navigation

"Hollywood" M-16 Blank Adapter (BFA) - Weapons Related

"Hollywood" M-16 Blank Adapter (BFA)

Product Code: BFA-M16 Category: Weapons Related
"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Blank adapters are machined from cold rolled 1018 steel for durability.

Priced per BFA.

We make three different sizes for these blank adapters:
USGI blanks and Euro NATO surplus are the weakest blanks and use the smallest aperture.
LAM blanks are a "mid-grade" blank with a loud retort, but not as loud and not as much flash as the Swanson Hot blanks.
SWANSON HOT blanks are the loudest / strongest blanks on the market.

USGI - for M200/M200A1 blanks (0.080)
LAM - for Atlantic Wall "LAM" mid-power blanks (0.125)
HOT - for Swanson's Motion Picture Blanks (0.175)

CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE!
$15.00

* Required Fields

$15.00
Description

Details

"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Blank adapters are machined from cold rolled 1018 steel for durability. Priced per BFA. We make three different sizes for these blank adapters: USGI blanks and Euro NATO surplus are the weakest blanks and use the smallest aperture. LAM blanks are a "mid-grade" blank with a loud retort, but not as loud and not as much flash as the Swanson Hot blanks. SWANSON HOT blanks are the loudest / strongest blanks on the market. USGI - for M200/M200A1 blanks (0.080) LAM - for Atlantic Wall "LAM" mid-power blanks (0.125) HOT - for Swanson's Motion Picture Blanks (0.175) CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE!
Additional

Additional Information

Condition NEW
Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

1Reviews For "Hollywood" M-16 Blank Adapter (BFA)

  1. Dustin8/7/2023

    You may not be able to use these with anything other than an A2 style flash hider. You may also need to use a much thicker crush washer, or eliminate the washer altogether when using this flash hider. (When installing the BFA I just leave the washer off and snug the flash hider down on this aluminum BFA.)

    I've shot close to 1k USGI blanks through the .080 version with a standard AR-15 buffer spring and bolt carrier group. As far as I can tell any malfunction was most likely due to the reman blanks that were being fired. The recoil is similar to 5.56 ball type ammo. The sound and muzzle flash are a bit less than live ammo, but still enough to get the job done.

    *Note from Moore Militaria - The BFA will work the "standard" flashiders: 3 prong, A1 and A2. Basically you need the internal shelf to hold it against the muzzle. The blank adapters are machined form 1018 steel, a low carbon steel giving good durability. You can typically secure the BFA and flashider well using the standard washer.

Add a review