This is the third pattern XM3 Bipod Case for the M3 Bipod. The case is made from cotton canvas and is intended for use with the M-16 rifle. These OD cotton carriers were designed to carry the basic folding M3 bipod and they have the external pocket for cleaning supplies as well as the side pocket with flap meant to carry the three piece cleaning rod (a 4 piece will work as well). We have both G/VG used and EXC condition available. We have one EXC condition with a broken zipper as well. Learn More
M-16 Cleaning Kit. This is a standard cleaning kit with pouch for the M16 series of rifles. Kit includes nylon pouch, 4 piece rod, patch pull, chamber brush, bore brush, utility brush, and Oil bottle. Small accessories like thin metal brush, patches and pipe cleaners generally not included. Pouch is a modern commercial copy and is not US marked, but you can add a US marked contract pouch for $10 (they are $15 seperately). Learn More
M-16 Cleaning Kit Pouch, USGI. This is an unissued USGI surplus cleaning kit pouch for the M16 rifle. Pouch is marked "Case, Maint. Equip., M16A1 Rifle." Perfect to build your own cleaning kit or to replace a pouch you currently have. Learn More
Bandoleer Re-Pack Kit, M-16 This is the "traditional" issue. Repack kit consists of one 7 pocket cotton bandoleer, 7 cardboard inserts, 14 stripper clips, and a magazine charger. Learn More
Bandoleer, M-16, 7-pocket, cotton body and strap. They will hold stripper clips or 20 round magazines. Excellent condition. Most are 72 to 75 dated. We have a few 1970 dated and a couple of extremely rare 1967 dated. Learn More
M-16 / M16A1 Full Bird Cage Flash Hider. This is the standard "full bird cage" flashhider that came into use in 1967. Will fit all standard threaded 1/2 x 28 AR-15 / M-16 rifles. Learn More
M-16 3-Prong Flash Hider. This is the earlier 3 Prong Flashider commonly seen on M-16's and XM-16E1's. It was replaced by the full bird cage seen below starting in 1967. Will fit all standard threaded 1/2 x 28 AR-15 / M-16 rifles. Learn More
"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Blank adapters are machined from cold rolled 1018 steel for durability.
Priced per BFA.
We make three different sizes for these blank adapters:
USGI blanks and Euro NATO surplus are the weakest blanks and use the smallest aperture.
LAM blanks are a "mid-grade" blank with a loud retort, but not as loud and not as much flash as the Swanson Hot blanks.
SWANSON HOT blanks are the loudest / strongest blanks on the market.
USGI - for M200/M200A1 blanks (0.080)
LAM - for Atlantic Wall "LAM" mid-power blanks (0.125)
HOT - for Swanson's Motion Picture Blanks (0.175)
CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE! Learn More
M16A1 Rifle Armorer / Depot Maintenance and Repair. Revised January 1980 edition. Covers general description, repair, maintenance, parts, special tools and equipment, armorers tools, replacement parts list, etc. Learn More
TM 9-1005-249-14: Rifle 5.56mm XM16E1 (M16) and Launcher, Grenade, 40mm, XM-148. Dated August 1966 (reprint). Includes operation, cleaning, and assembly / disassembly of the pre-cursor to the M-203 system. 120 pages. Training and Field Manual Learn More
