TM 9-1005-249-14: Rifle 5.56mm XM16E1 (M16) and Launcher, Grenade, 40mm, XM-148. Dated August 1966 (reprint). Includes operation, cleaning, and assembly / disassembly of the pre-cursor to the M-203 system. 120 pages. Training and Field Manual Learn More

M-16 / M16A1 Pistol Grip. This is an excellent reproduction of the correct pistol grip for the M-16 and M-16A1 rifles as well as all early variants made before the A2 series in the 1980's. It differs from the later A2 style in that it lacks the finger groove. These new A1 Pistol Grips are crafted from high-quality Dupont Zytel 30% glass filled nylon so they look right, feel right, and hold up well. Original grips have become scarce and are often in used condition. This is a chance to have a quality, new piece on your rifle. Pistol grip screw and washer available as a separate add on. Learn More

M16A1 Rifle Armorer / Depot Maintenance and Repair. Revised January 1980 edition. Covers general description, repair, maintenance, parts, special tools and equipment, armorers tools, replacement parts list, etc. Learn More

"Hollywood" M-16 Blank Adapter (BFA) for M16 / AR15 Rifles. These are "Hollywood" BFAs and cannot be seen when installed. Simply remove the flash hider and drop in the adapter with the narrow end facing the out towards the end of the flash hider and the broad end against the base of the muzzle. Blank adapters are machined from cold rolled 1018 steel for durability. Priced per BFA. We make three different sizes for these blank adapters: USGI blanks and Euro NATO surplus are the weakest blanks and use the smallest aperture. LAM blanks are a "mid-grade" blank with a loud retort, but not as loud and not as much flash as the Swanson Hot blanks. SWANSON HOT blanks are the loudest / strongest blanks on the market. USGI - for M200/M200A1 blanks (0.080) LAM - for Atlantic Wall "LAM" mid-power blanks (0.125) HOT - for Swanson's Motion Picture Blanks (0.175) CHECK FIRED BRASS FOR DAMAGE. IF THE BRASS IS MANGLED, THE APERTURE IS TOO TIGHT AND NEEDS TO BE OPENED. IF YOU ARE UNSURE, ASK THE MANUFACTURER OF YOUR BLANKS WHAT SIZE HOLE HE RECOMMENDS! FAILURE TO USE THE CORRECT DIAMETER HOLE CAN RESULT IN SERIOUS PERSONAL INJURY AND / OR DAMAGE TO YOUR RIFLE! Learn More

M-16 3-Prong Flash Hider. This is the earlier 3 Prong Flashider commonly seen on M-16's and XM-16E1's. It was replaced by the full bird cage seen below starting in 1967. Will fit all standard threaded 1/2 x 28 AR-15 / M-16 rifles. Learn More

M-16 / M16A1 Full Bird Cage Flash Hider. This is the standard "full bird cage" flashhider that came into use in 1967. Will fit all standard threaded 1/2 x 28 AR-15 / M-16 rifles. Learn More

Bandoleer, M-16, 7-pocket, cotton body and strap. They will hold stripper clips or 20 round magazines. Excellent condition. Most are 72 to 75 dated. We have a few 1970 dated and a few 1969 dated. The earlier dated bandoleers are extremely hard to find. Learn More

Bandoleer Re-Pack Kit, M-16 This is the "traditional" issue. Repack kit consists of one 7 pocket cotton bandoleer, 7 cardboard inserts, 14 stripper clips, and a magazine charger. These are correct for the Vietnam era. Bandoleers are 75 and earlier dated, have cotton straps, the cardboards are NOS and are the correct vintage style (not the newer "fat" style for 30rd repack kits) etc. Learn More

M-16 Cleaning Kit Pouch, USGI. This is an unissued USGI surplus cleaning kit pouch for the M16 rifle. Pouch is marked "Case, Maint. Equip., M16A1 Rifle." Perfect to build your own cleaning kit or to replace a pouch you currently have. Learn More

M-16 Cleaning Kit. This is a standard cleaning kit with pouch for the M16 series of rifles. Kit includes nylon pouch, 4 piece rod, patch pull, chamber brush, bore brush, utility brush, and Oil bottle. Small accessories like thin metal brush, patches and pipe cleaners generally not included. Pouch is a modern commercial copy and is not US marked, but you can add a US marked contract pouch for $10 (they are $15 seperately). Learn More